PRODUCTS CENTER
poland Solar Photovoltaic C-shaped steel strut channel roll forming machine
Category:
Product Description
25m C-type photovoltaic bracket equipment
Equipment technical parameters (gear box universal joint gantry arch type)：
1.Shaft diameter 80mm, 40Cr quenching and tempering treatment；
2.The thickness of the body plate is 25mm, precision milling，
3.Bearing 314NU;
4.Reducer 22KW-K107 (hard gear reducer) 1 set；
5.14 rows of pressure rollers are formed.The production model is 60-120mmC steel
6.Main engine power Kaiping (upper 3, lower 4 axles)；
7.The cutting is: servo tracking, non-stop hydraulic mold cutting; equipped with a hydraulic pumping station of 7.5KW, and a servo motor of 3.8KW.Randomly equipped with 1 set of blades, and an additional mold knife is purchased for 2,000 yuan/set.
9.The electronic control is automatic control by frequency conversion PLC；
10.The roller material is Cr12 mold steel, vacuum quenched; fine turning.
11.Correction shaft: worm gear type；
12.Transmission method: 170 gearbox universal joint transmission；
13.The main frame is welded with steel plate；
14.The weight of the unit is about 9T and the size is about 9X2X1.3m; the total weight of the unit is about 10 tons.
16.Randomly equipped with a 6-meter passive feeding rack (no power).
17.Platen thickness 2-3mm
18. The production speed of the unit is 30 meters/min
19. The thickness of the cast steel gantry arch is 55mm.
20.The equipment is suitable for galvanized steel strips, black iron steel strips, zinc-aluminum-magnesium steel strips.
Photovoltaic type C equipment (40 meters/min) technical parameters (gearbox transmission)
1.Shaft diameter Ø80mm, No. 45 quenching and tempering treatment；
2.The thickness of the cast steel arch is 50mm.
3.Double NU212 cylindrical roller bearings.
4.Motor 15KW+K97*2 sets；
5.16 rows of pressure rollers; gearbox drive
6.Main engine power Kaiping (upper 3, lower 4 axles)；
7.The cutting is: non-stop hydraulic mold cutting (with a set of blades with the equipment); servo tracking non-stop hydraulic mold cutting; equipped with a hydraulic pumping station 7.5KW, servo motor 3.8KW.Randomly equipped with 1 set of blades, and an additional mold knife is purchased for 2500 yuan/set.
8.The electronic control is automatic control by frequency conversion PLC；
9.The roller material is Cr12, vacuum quenched；
10.Correction axis: universal straightening axis；
11.Transmission method: 170 gearbox (8M) transmission；
12.The main frame is welded with steel plate; the thickness of the fuselage plate is 25mm, and the positioning keyway is processed by precision milling.
13.The weight of the main unit is about 8T and the size is about 9mX2mX1.1m；
14.Pressing thickness 1.5-3.0mm
15.Type C model has a bottom width of 50-160, a waist height of 40-80, and a small side of 15-20.
16.Randomly equipped with a 6-meter passive feeding rack (no power).
17.Platen thickness 1.5-3.0mm
18.Unit production speed 40 meters/min
19.The equipment is suitable for galvanized steel strips, black iron steel strips, zinc-aluminum-magnesium steel strips.
To inquire about our products, please leave your email to us and we will contact you within 24 hours.
Copyright:©Cangzhou Guangchi Machinery co., Ltd | Poweredby:300.cn | Privacy Policy